Canon imageRUNNER C3220 Copying Manual page 305

4
Enter a name © press [OK].
The maximum number of characters that you can enter for a key name is 10.
The assigned name appears on the key.
NOTE
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
•
If you press [OK] without entering any characters, the key name reverts to its
current name (default C1 to C4).
5
Press [Cancel] © [OK] © [Done].
The display returns to the Copy Basic Features screen.
NOTE
Pressing [Cancel] © [OK] © [Done] only names the selected key ([C1] to [C4]), but
does not recall the color balance settings. If you press [OK] © [OK] © [Done], the
name is stored in the selected key ([C1] to [C4]), and the color balance settings are
recalled at the same time.
Adjusting the Color 7-9
7