9
6
10
6-26
Area Designation
Select [Shift center] or [Do not shift center] © press [OK] ©
[Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
NOTE
•
If the Center Shift mode is already specified beforehand, the Center Shift Settings
screen does not appear.
•
The Center Shift settings specified within the Area Designation mode are deleted
when the area settings are canceled.
Press
(Start).
If you need to designate the same area for multiple originals, remove the original
from the platen glass © place all of the originals into the feeder © press
(Start).
Copying starts.
NOTE
To cancel this setting, press [Special Features] © [M] © [Area Designation] © [Pen
•
Entry] © [Cancel].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).