Image Repeat - Canon imageRUNNER C3220 Copying Manual

Image Repeat

This mode enables you to repeatedly copy the entire original image in either the
vertical or horizontal direction. The following two settings are available for the Image
Repeat mode.
IMPORTANT
•
To use Area Designation (Framing) with the Image Repeat mode, first specify the Image
Repeat mode, and then designate the desired area. Only one area can be designated.
•
If the number of times the image to be repeated is set to too many or the designated area
is too small, the color original may be scanned in the Black mode, even if the color mode
is set to 'Auto-Color Select'.
I Automatic Setting
The original image is copied so that the maximum possible number of repeats fit onto the
selected paper size.
IMPORTANT
The Image Repeat (Auto) mode cannot be used with the Automatic Paper Selection,
6
Auto Zoom, Auto XY Zoom, Entire Image, Multi-Page Enlargement, Book 2-Sided,
Two-page Separation, Cover/Sheet Insertion, Image Combination, Shift, Booklet,
Transparency Interleaving, Margin, Different Size Originals, Frame Erase, Mirror Image,
Tab Paper, or Area Designation (Blanking) mode.
I Manual Setting
The original image is copied the specified number of times.
IMPORTANT
The Image Repeat (Manual) mode cannot be used with the Entire Image, Multi-Page
Enlargement, Book 2-Sided, Two-page Separation, Cover/Sheet Insertion, Image
Combination, Shift (No. Key Entry), Booklet, Transparency Interleaving, Margin, Different
Size Originals, Frame Erase, Mirror Image, Tab Paper, or Area Designation (Blanking)
mode.
6-6 Using Image Creation Modes