Naming A Color Balance Key - Canon imageRUNNER C3220 Copying Manual

G If you select a key that already has settings stored in it:
❑
A screen appears, asking for your confirmation to overwrite the previous
settings.
❑
Press [Yes].
To cancel overwriting the settings, press [No].
The message <Stored in memory.> appears for approximately two seconds on
the touch panel display.
The stored settings are displayed.
4
Press [Cancel] © [Cancel] © [Done].
The display returns to the Copy Basic Features screen.
NOTE
Pressing [Cancel] © [Cancel] © [Done] only stores the color balance settings in
the selected key ([C1] to [C4]), but does not recall them. If you press [OK] © [OK]
© [Done], the color balance settings are stored in the selected key ([C1] to [C4]),
and recalled at the same time.

Naming a Color Balance Key

1
Press [Special Features] © press [M] or [L] until [Color
Balance] appears © press [Color Balance].
If necessary, see the screen shots in steps 1 and 2 of "Adjusting the Color
Balance," on p. 7-2.
Adjusting the Color 7-7
7