•
If you select [Double] (Left):
Originals
Three Copies
of Each Page
1
2
3
4
•
If you select [Saddle Stitch]:
Originals
Three Copies
8
1
6
3
IMPORTANT
•
If the optional Finisher-M1 is attached, you cannot select the stapling position. For more
information on the stapling positions, see Chapter 3, "Optional Equipment," in the
Reference Guide.
•
The Staple mode cannot be used with the Multi-Page Enlargement, Booklet,
Transparency Interleaving, Mirror Image, or Tab Paper mode.
•
The Saddle Stitch mode cannot be used with the 2 1-Sided, Book 2-Sided, Automatic
Paper Selection, Two-page Separation, Cover/Sheet Insertion, or Image Combination
mode, in addition to the above mentioned modes.
•
The accuracy of folds created in the Saddle Stitch mode may vary, depending on the
paper type and the number of sheets.
NOTE
•
To use the Saddle Stitch mode, the original must already be in booklet form, as shown in
the illustration above. (See "Booklet Mode," on p. 3-13.)
•
[Saddle Stitch] can be set only if the 1 2-Sided or 2 2-Sided mode is selected. (See
"Two-Sided Copying," on p. 2-76.)
Set 1
Collated in
Page Order
Set 1
of Each Page
Collated in
Page Order
Set 2
Set 3
Set 2
Set 3
Collating Copies
2
2-63