The selected mode is set, the display returns to the Copy Basic Features
screen, and the copy ratio generated by the machine is displayed.
NOTE
•
If you make a mistake when entering values, press [C] on the touch panel display
© enter the correct values.
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
(Clear) to clear your entries.
•
For instructions on entering values in inches, see Chapter 2, "Basic Operations," in
the Reference Guide.
•
To specify the horizontal (X) and vertical (Y) axes independently, press [XY Zoom].
4
Press
(Start).
Copying starts.
NOTE
•
To return the copy ratio to 100%, press [Direct].
To cancel this setting, press [Copy Ratio] © [Zoom Program] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Making Copies with Different XY Copy Ratios (XY Zoom)
1
Place your originals © press [Copy Ratio].
-
(numeric keys), and
Changing the Copy (Zoom) Ratio
2
2-41