Using the Edit Pen
You can use the edit pen to designate two different types of areas: a rectangular
area (two points) and a polygonal area (four points or more).
IMPORTANT
•
You can designate only one polygonal area at a time.
•
You cannot designate a rectangular area and a polygonal area at the same time.
•
You can only designate areas when the original is placed on the platen glass.
1
Place your original on the platen glass © press [Special
Features].
If necessary, see the screen shot in step 1 of "Inverting Images (Nega/Posi)," on
p. 6-4.
2
Press [M] or [L] until [Area Designation] appears © press
[Area Designation].
Area Designation
6-21
6