Canon imageRUNNER C3220 Copying Manual page 271

NOTE
•
If the designated area is rectangular, and you want to continue designating other
areas, repeat steps 5 to 7. Areas that have already been designated are displayed
with the new area.
•
To modify a designated area that was specified using the edit pen, press [Area Fine
Adj.] © [Point select] until the screen displays the desired point that you want to
modify © press [
[Preview] to check the modified area.
8
Press [Next].
] to move the point © press [Done] ©
], [ ], [ ], or [
Area Designation 6-25
6