Feeder (Dadf-K1) (Optional) - Canon imageRUNNER C3220 Copying Manual

Feeder (DADF-K1) (Optional)

You should use the feeder when you want to copy several originals at the same
time. Place the originals into the feeder and press
automatically feeds the originals to the platen glass and scans them. Two-sided
originals can also be automatically turned over and scanned as two-sided
documents.
You can place the following originals into the feeder's original supply tray:
• Weight:
- 14 to 28 lb bond (52 to 105 g/m
•
Size:
- 11" x 17", LGL, LTR, LTRR, or STMT
•
Tray Capacity:
- 11" x 17" or LGL: 15 sheets (20 lb bond (80 g/m
- LTR or STMT:
IMPORTANT
•
Do not place the following types of originals into the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals which may not feed smoothly
- Transparencies and other highly transparent originals
•
If the same original is fed through the feeder repeatedly, the original may fold or become
creased, and make feeding impossible. Limit repeated feeding to a maximum of 30 times
(this number varies, depending on the type and quality of the original).
•
If the feeder rollers are dirty from scanning originals written in pencil, perform the feeder
cleaning procedure. (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
•
Always smooth out any folds in your originals before placing them into the feeder.
2
)
30 sheets (20 lb bond (80 g/m
(Start). The machine
2
))
2 ))
Placing Originals
1
1-27