If you press [Cancel], the display returns to the screen that was displayed before
pressing [Access Number].
4
Select the destination of the job done notice © press [OK] ©
[Done].
If the desired destination is not displayed, press [M] or [L] to scroll to the
desired destination.
The selected mode is set, and the display returns to the Copy Basic Features
screen.
NOTE
•
For instructions on selecting a destination, see Chapter 2, "Basic Sending
Methods," in the Sending and Facsimile Guide.
•
You cannot select multiple destinations at the same time.
5
Press
(Start).
Copying starts.
Once copying is complete, a job done notice is sent to the selected destination.
NOTE
To cancel this setting, press [Special Features] © [Job Done Notice] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Job Done Notice
5-11
5