Canon imageRUNNER C3220 Copying Manual page 131

3
Specify the desired copy ratios.
G To manually specify the copy ratios (XY Zoom):
❑
Use the numeric keys or press [-] or [+] on the touch panel display to enter
values.
❑
Press [X] (horizontal axis) © enter a value.
❑
Press [Y] (vertical axis) © enter a value.
❑
Press [OK].
You can also use
your entries.
You can change the values by pressing [-] or [+], even if you have entered the
values using
The selected mode is set, the display returns to the Copy Basic Features
screen, and the specified copy ratios are displayed.
NOTE
•
If you make a mistake when entering values, press [C] on the touch panel display
© enter the correct values.
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
- (numeric keys) to enter values, and
- (numeric keys).
Changing the Copy (Zoom) Ratio
2
(Clear) to clear
2-47