Canon imageRUNNER C3220 Copying Manual page 201

If the following screen is displayed, press [OK] © perform either of the following
procedures in Common Settings (from the Additional Functions screen) (See
Chapter 4, "Customizing Settings," in the Reference Guide.):
•
Set Register Paper Type for the selected paper source to [Transparency].
•
Set the paper type setting to [Transparency] if Stack Bypass Standard Settings
is set to 'On'.
IMPORTANT
Make sure that transparencies are loaded into the selected paper source. Loading
paper types other than transparencies may result in a paper jam.
3
Select whether to copy on the interleaf sheets © press [Next].
Transparency Interleaving
3
3-23