3
Press [OK].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
4
Press
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display © press
is complete, press [Done].
Copying starts.
NOTE
To cancel this setting, press [Finisher] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Same Page (Group)
1
Place your originals © press [Finisher].
NOTE
If Auto Collate in Copy Settings (from the Additional Functions screen) is set to
'On', the Collate or Offset Collate mode is automatically set when you place your
originals in the feeder. (See "Auto Collate," on p. 9-6.)
(Start).
(Start) once for each original. When scanning
Collating Copies
2-67
2