4
Press [Yes].
To cancel erasing the settings, press [No].
The message <Erased.> appears for approximately two seconds on the touch
panel display.
The stored color balance settings are erased.
NOTE
Key names are not erased. For instructions on changing a key name, see "Naming
a Color Balance Key," on p. 7-7.
5
Press [Cancel] © [OK] © [Done].
The display returns to the Copy Basic Features screen.
NOTE
When a color balance key is not in use, as is the case when you delete its settings,
[OK] is grayed out, and you must press [Cancel] © [OK] © [Done] to complete the
procedure.
Adjusting the Color
7-13
7