Canon imageRUNNER C3220 Copying Manual page 132

2
4
2-48 Changing the Copy (Zoom) Ratio
G To have the copy ratios automatically specified (Auto XY Zoom):
❑
Press [Auto XY Zoom] © [OK].
The display returns to the Copy Basic Features screen, and the copy ratios
generated by the machine are displayed.
IMPORTANT
If you select [Auto XY Zoom], make sure that you select a paper size other than
[Auto]. If you do not specify a paper size, Paper Drawer 1 is automatically selected
and the copy ratios are set to match the size of the paper loaded in that drawer.
NOTE
If you select [Auto XY Zoom] in the following cases, <X: Auto %> and <Y: Auto %>
are displayed as the copy ratios on the Copy Basic Features screen:
- When the original is placed in the feeder
- When the machine is not able to detect the size of the original placed on the
platen glass
Press (Start).
Copying starts.
NOTE
•
To return the copy ratio to 100%, press [Direct].
To cancel this setting, press [Copy Ratio] © [XY Zoom] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).