Canon imageRUNNER C3220 Copying Manual page 225

2
Press [Original Frame Erase].
3
Press [-] or [+] to set the frame erase width.
NOTE
•
To enter values in millimeters, press [mm].
•
When entering the value in millimeters, you can also use
and (Clear) to clear your entry.
•
You can change the value by pressing [-] or [+], even if you have entered the value
using - (numeric keys).
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
The default setting is '1/8" (4 mm)'. The maximum original frame erase width that
you can set is '1 15/16" (50 mm)'.
G If you want to set the same width for all four borders:
❑
Press [-] or [+] to set the frame erase width © press [Next].
- (numeric keys),
Frame Erase 4-15
4