Canon imageRUNNER C3220 Copying Manual page 292

4
5
6
6-46 Tab Paper
Select the tab paper size © press [Next].
Select the type of tab paper © press [-] or [+] to set the shift
width © press [Next].
If you select [Tab Paper Creation], press [OK] © proceed to step 7.
NOTE
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
(Clear) to clear your entries.
•
You can change the value by pressing [-] or [+], even if you have entered the value
using - (numeric keys).
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
The default shift width setting is '1/2" (13 mm)'. The maximum width that you can
set is '1" (25 mm)'.
- (numeric keys), and