Platen Glass - Canon imageRUNNER C3220 Copying Manual

NOTE
•
If the top edge of the original is not aligned with the back edge of the platen glass (by the
arrow in the top left corner), your original may not be scanned correctly, depending on the
copy mode that you have set.
•
Originals of the following sizes can be placed either vertically or horizontally. However,
the scanning speed for horizontally placed originals is somewhat slower than vertically
placed originals. Place originals horizontally when scanning with a Preset Zoom, such as
when enlarging an LTR original onto 11" x 17" paper.
- Platen glass: LTR, STMT
- Feeder:
•
Horizontally placed LTR and STMT originals are referred to as LTRR and STMTR.
•
11" x 17" and LGL originals must be placed horizontally.

Platen Glass

You should use the platen glass when copying bound originals (such as books and
magazines), heavy or lightweight originals, and transparencies. You should also
place originals onto the platen glass when you want to copy an 11" x 17" original
with an image that extends all the way to the edges without the periphery of the
original being cut off. (See "Manual Paper Selection," on p. 2-9, and "Entire Image,"
on p. 2-37.)
NOTE
The machine automatically detects the size of the following originals: 11" x 17", LGL,
LTR, and LTRR.
1
Lift the feeder/platen cover.
LTR
Sensor
Placing Originals
1
1-23