Canon imageRUNNER C3220 Copying Manual page 280

4
6
5
6-34 Area Designation
Press [Start Scan].
Scanning starts.
IMPORTANT
Confirm that the original is placed on the platen glass.
Designate the area using the edit pen.
If you designate a point outside the permitted area, a message appears to inform
you that the specified position is not acceptable.
NOTE
•
To clear the last point entered, press [Erase Point]. (Once an area is designated,
[Erase Point] changes to [Clear Area].)
•
To clear a designated area, press [Clear Area].
To zoom in on any area on the original, press the ratio drop-down list © select an
•
enlargement ratio © press [ ], [ ], [M], or [L] to display the desired area.