1
Load the tab paper into the stack bypass.
Make sure that the height of the paper stack does not exceed the loading limit
mark (
).
IMPORTANT
Make sure that the tab paper is loaded in the stack bypass in the following way:
- The side to be printed on is placed face up.
- The first sheet of tab paper to be printed on is placed on the top.
- The tab (protruding part of the paper) is placed on the right side.
2
Place your originals © press [Special Features].
If necessary, see the screen shot in step 1 of "Inverting Images (Nega/Posi)," on
p. 6-4.
3
Press [M] or [L] until [Tab Paper] appears © press [Tab
Paper].
Position of Tabs
Tab Paper
6
6-45