6
6-12
Using Image Creation Modes
G Using the numeric keys:
❑
Press [Numeric Key Entry].
IMPORTANT
•
Before performing the next step, you must manually measure the size and position
of the area that you want to designate on the original.
•
When you measure the XY values, always start measuring from the image out to
the right side edge of the original and up to the top of the original. These
measurements tell the machine the desired framed area's size and position.
How to Measure the Area to Be Framed
Original
8 1/2"
Y1
X2
AB
X1
Y2
11"
[X1] = 5 1/2"
[X2] = 7 1/4"
-
[X1]:
The distance of the area's right border to the original's right edge.
-
[X2]:
The distance of the area's left border to the original's right edge.
-
[Y1]:
The distance of the area's top border to the original's top edge.
-
[Y2]:
The distance of the area's bottom border to the original's top edge.
Result
8 1/2"
AB
[Y1] = 1 1/8"
[Y2] = 1 7/8"
11"