Binding Erase
This mode erases the shadows that appear on copies from binding holes on
originals.
IMPORTANT
•
The Binding Erase mode cannot be used with the Entire Image, Multi-Page Enlargement,
Book 2-Sided, Two-page Separation, Booklet, Image Repeat, Mirror Image, Tab Paper,
or Area Designation (Framing) mode.
•
Do not place originals with binding holes into the feeder, as this may damage the
originals.
•
If you are using the Binding Erase mode, the borders you do not select are also erased
by 1/8" (4 mm).
4
1
2
4-22
Frame Erase
Place your original on the platen glass © press [Special
Features] © [Frame Erase].
If necessary, see the screen shot in step 1 of "Original Frame Erase," on p. 4-14.
NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.
Press [Binding Erase] © select the border where the binding
holes are located.
The border is where the binding holes are located on the original, if you visualize
the original as being face up.