Mounting The Heat Exchanger Assembly Into The Projector - Barco HDF W Series Service Manual

16.4 Mounting the heat exchanger assembly into the projector

Necessary tools
• 2,5 mm Allen key.
• 7 mm wrench.
• Universal plier.
How to mount heat exchanger assembly into the projector?
1. Slide the heat exchanger assembly into the projector. Make sure the guides match the grooves of the assembly.
Image 16-11
2. Fasten both screws.
3. Reinstall the electrical connection (2).
Image 16-12
4. Couple up the hose coming from the light pipe entrance to the heat exchanger.
R5905312 HDF W SERIES 24/01/2013
1
2
16. Heat exchanger
275