Barco HDF W Series Service Manual page 171

Image 10-40
5. Take a new SMPS unit and insert the board in the guides of the SMPS compartment. Push it completely in.
6. Make the electrical connections:
- Mains input (reference 1)
- Ground wire (reference 2)
- Control connector (blue wires) (reference 3)
- Power out connector (black wires) (reference 4)
Caution: Support the bottom of the SMPS board while plugging in the wire units.
Image 10-41
7. Place the cover on its place and fasten the 4 retaining screws (reference 1 to 4 image 10-37).
R5905312 HDF W SERIES 24/01/2013
1 2
10. Card Cage
3 4
167