Rigging frame
4.1 Mounting the adapter plate onto the projector
Required tools
Torque wrench with 6 mm and 14 mm Allen bit
Required parts
•
Hex screws with socket head M16 (x4)
•
Hex screws with socket head M8 (x4)
•
Spring washer M16 (x4)
•
Spring washer M8 (x4)
•
Plain washer M16 (x4)
•
Plain washer M8 (x4)
How to mount the plate
1.
Place the projector on clean, flat and stable surface, with its feet facing upwards.
2.
Remove the projector feet as illustrated.
Image 4–1
3.
Prepare the four M16 and the four M8 hex screws as follows:
•
Attach a spring washer (reference 2) to each of the four hex screws (reference 1).
•
Attach a plain washer (reference 3) to each of the four the hex screws.
1
2
3
Image 4–2
4.
Align the screw holes of the adapter plate with the screw holes where the projector feet used to be.
5.
Drive in the four M16 hex screws into the adapter plate and projector. Use a torque wrench with 14 mm
Allen bit.
50
R5913458 /01
G100
20 Nm
20 Nm