Removal And Installation Of The Projector Covers - Barco HDF W Series Service Manual

6. REMOVAL AND INSTALLATION OF THE PROJECTOR
COVERS
About this chapter
Most maintenance and servicing procedures demand removing one or more of the projector covers to gain access to the parts to
maintain or to service. To avoid redundancy, all procedures about cover removing or installing are grouped together in this chapter.
The maintenance and servicing procedures also refer to this chapter if required. The procedures in this chapter describe, with
detailed step by step actions and illustrations, how to remove or install the projector covers. Note that some covers may only be
removed by qualified service personnel, see remarks above each procedure.
W
ARNING
one of the covers.
R5905312 HDF W SERIES 24/01/2013
:
Always switch off the projector and unplug the power cord at the projector side before removing

6. Removal and installation of the projector covers

97