Replacing The Fan Control Board - Barco HDF W Series Service Manual

17. Board replacement procedure

17.1 Replacing the Fan control board

Before starting the replacement
1. Remove the Input & Communication cover.
2. Remove the Input & Communication unit.
Necessary tools
• T10 Torx screwdriver
• Allen key
How to replace
1. Turn out both fixation screw (1) of the fan control board cover.
Image 17-1
2. Remove the cover.
3. Remove the 4 fixation screws (2) of the fan control board.
Image 17-2
4. Left up the board on the front side a little and pull it out of its sockets.
Note: Make sure not to damage components on the back side of the
278
1
1
2
2
R5905312 HDF W SERIES 24/01/2013
2
2