Barco HDF W Series Service Manual page 231

Image 14-27
5. Cut the plastic cable tie if necessary.
6. Remove the Lens Holder from the projector chassis by loosening the 4 screws (reference 5 image 14-29). Use a 5mm Allen
wrench.
5
5
Image 14-29
7. Connect the wire unit (reference 3 image 14-30) of the horizontal shift motor and the wire unit (reference 4 image 14-31) of the
vertical shift motor.
Image 14-30
8. Mount the EMC wire unit (reference 2 image 14-32) of the Lens Holder to the projector frame by driving in the fixation screw.
R5905312 HDF W SERIES 24/01/2013
3
Image 14-28
5
5
3
Image 14-31
14. Lenses and Lens Holder
4
4
227