Mounting A New Lens Holder - Barco HDF W Series Service Manual

14.9 Mounting a new Lens Holder

Necessary tools
• 7 mm flat screwdriver.
• Side cutter.
• 3 mm Allen wrench.
• 5 mm Allen wrench.
How to mount
1. Place the Lens Holder on the projector chassis and fasten with the 4 screws (reference 5 image 14-34). Use a 5 mm Allen
wrench.
Note: One motor must point the right side of the projector and the other one must point to the top of the projector.
5
5
Image 14-34
R5905312 HDF W SERIES 24/01/2013
5
5
14. Lenses and Lens Holder
229