Barco HDF W Series Service Manual page 197

3
1
Image 13-4
5. Turn out the hexagon head screw at the left side of the light processor (3).
6. Interrupt the liquid cooling circuit by uncoupling both valved fitting. Once valved fitting is located in the tube coming from the
pump and leading to the light processor. The second valved fitting is located in the tube coming from the light pipe entrance and
leading to the heat exchanger.
To interrupt a valved fitting, press on the knob (1) and pull out the connector (2).
R5905312 HDF W SERIES 24/01/2013
13. HDF Light Processor
2
193