Mounting Of The Controller Assembly - Barco DP2K SLP Series Service Manual

Laser Phosphor Light Source

7.7 Mounting of the Controller assembly

How to mount the Controller assembly?
1. Place the Controller assembly onto the Light Source as illustrated. Use a 3 mm Allen wrench to Tighten the
two hex screws (reference 2, Image 7-13).
Image 7-13
2. Tighten the 2 set screws on the topside of the Controller assembly (reference 1,Image 7-14 ).
1
Image 7-14
3. Reconnect the wiring onto the Controller assembly.
4. Place cable binders to hold the light source wiring onto the controller assembly. Do this as illustrated
(reference 1, Image 7-15).
66 R5906848 /04 DP2K SLP Series