Barco HDF W Series Service Manual page 56

5. Troubleshooting
Code 6068: "Board id: formatter blue unknown format" (Warning)
Situation
Old projector software installed.
The ID parameters of the Formatter
board of the BLUE channel are
written in a format which is not
known by the projector software.
Formatter board of the BLUE
channel has invalid firmware.
Corrupt projector software.
Code 6069: "Board id: formatter blue not accessable" (Error)
Situation
Malfunction Formatter board of the
BLUEchannel. The projector can not
read from the installed Formatter
board of the BLUE channel.
Code 6070: "Board id: formatter blue read error" (Error)
Situation
Malfunction Formatter board of the
BLUEchannel. The projector can not
read from the installed Formatter
board of the BLUE channel.
Code 6071: "Board id: formatter blue write error" (Error)
Situation
Malfunction Formatter board of the
BLUE channel. The projector can
not write to the installed Formatter
board of the BLUE channel.
Code 6072: "Board id: warp unknown format" (Warning)
Situation
Old projector software installed. The
ID parameters of the Warp board
are written in a format which is not
known by the projector software.
Warp board has invalid firmware.
Corrupt projector software.
Code 6073: "Board id: warp not accessable" (Error)
Situation
Malfunction Warp board. The
projector can not read from the
installed Warp board.
Code 6074: "Board id: warp read error" (Error)
Situation
Malfunction Warp board. The
projector can not read from the
installed Warp board.
Code 6075: "Board id: warp write error" (Error)
Situation
Malfunction Warp board. The
projector can not write to the
installed Warp board.
52
Solution
Check if the version of the installed projector software is the latest available version. The
latest version can be downloaded from https://my.barco.com.
Replace the Light Processor. See "HDF Light Processor", page 189.
Reinstall the latest projector software.
Solution
Replace the Light Processor. See "HDF Light Processor", page 189.
Solution
Replace the Light Processor. See "HDF Light Processor", page 189.
Solution
Replace the Light Processor. See "HDF Light Processor", page 189.
Solution
Check if the version of the installed projector software is the latest available version. The
latest version can be downloaded from https://my.barco.com.
Replace the Warp module. See "Replacing the Warp module", page 159.
Reinstall the latest projector software.
Solution
Replace the Warp board. See "Replacing the Warp module", page 159.
Solution
Replace the Warp board. See "Replacing the Warp module", page 159.
Solution
Replace the Warp board. See "Replacing the Warp module", page 159.
R5905312 HDF W SERIES 24/01/2013