Lamp Run Time; Switching To Stand-By; Input Connections; Input Module Insertion Into The Projector - Barco Data 8200 Owner's Manual

Connections

Lamp Run Time

Lamp run time is 1000 hours. Operating the lamp longer than 1000 hours may damage
the projector. Please replace the lamp.
Warning : Using a lamp for more than 1000 hours is dangerous, the
lamp could explode.

Switching to stand-by.

Input connections.

Input module insertion into the projector :

All manuals and user guides at all-guides.com

Switching off

STANDBY
WARNING : When switching to standby, never restart projec-
tion (hot restrike) within the first 3 minutes to avoid damage
to the lamp.
0 I
Lamp run time
980 hours
WARNING
Lamp run time is 1000 hours
Operating the lamp longer
than 1000 hours may damage
the projector.
Please replace the lamp
<ENTER> to confirm²