Installation Of The - Barco HDF W Series Service Manual

6. Removal and installation of the projector covers
6.5 Installation of the front cover
W
ARNING
Necessary tools
7 mm flat screw driver.
How to install the front cover
1. Check if the front filter is present.
2. Ensure that no lens is mounted.
3. Install the front cover of the projector doing the following:
a) first hook in the side of the front cover at the front filter,
b) then gently push the other side of the front cover into position,
c) ensure that the locking studs in the corners click into their receivers.
Image 6-9
Front cover installation
4. Secure the front cover by locking the captive screw in the middle at the bottom of the front cover.
Image 6-10
Front cover, dust ring
5. Reinstall the rubber dust ring around the lens holder.
102
:
This procedure may only be performed by qualified technical service personnel.
R5905312 HDF W SERIES 24/01/2013