17. Board replacement procedure
17.2 Replacing the Power distribution board
Before starting the replacement
1.
Remove the Input & Communication cover.
2.
Remove the Input & Communication unit.
3.
Remove the front cover plate and remove the fan control board.
To replace the power distribution board, the combination power distribution board and fan control board must
be removed together.
Necessary tools
•
T10 Torx screwdriver
•
T10 Torx L-shape screwdriver
•
Allen keys
How to replace
1. Disconnect all connectors on the power distribution board.
(Formatter power cables, DMD cables, fan cables, lamp info module, etc.)
2. Remove the screws of the power distribution board (1)
1
1
Image 17-4
Remove screws
3. Take out the Power Distribution board
4. Insert a new Power distribution board.
5. Secure with the 5 removed screws.
6. Reconnect all connectors. See "Connections on the Power distribution board", page 281
Note: Connectors on the Power distribution board are color coded, equal to the used wires in the wires units.
280
1
1
1
R5905312 HDF W SERIES 24/01/2013