1
Getting Started
Front Panels
Front Panel Controls and Indicators
CAUTION
18
Figure 3
Keysight 81960A Compact Tunable Laser Module
Switch the laser output on or off using the button on its front panel, using
the [State] parameter in the instrument's Graphical User Interface, or
remotely using GPIB commands. When the 'Active' LED is lit the output is
enabled. When the active LED is not lit the output is disabled.
The built-in laser diode is active whenever the instrument is powered on,
therefore disabling the output is not sufficient to establish eye safe
conditions.
Keysight 81960A Compact TLS Module User's Guide