Figure 5-43. Installing The Ptm - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

To replace a PTM:
1. Holding the PTM upright, position it against the rear panels so that the PTM motor
housing assembly slides into the available space and the two pilot pins on the extrusion
mate with the holes in the rear of the top Library unit (see Figure 5-43).
PTM Motor
Housing
Assembly
Extrusion
Mating
Hole
Pilot
Pin

Figure 5-43. Installing the PTM

Parts Removal and Replacement 5-37
Pilot
Pin
cc0111