Installing The Inner Slide Members - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

Installation C-7

Installing the Inner Slide Members

Attach an inner slide member to both sides of the Library using the following procedures. Make
sure you attach each inner slide member of the rackmount slide assembly to the Library first and
then each middle and outer slide members to the storage cabinet. To attach the inner slide
members to the Library:
NOTE: The left and right slides are the same so there is no risk of confusing the parts upon reassembly.
1. Identify the parts of the rackmount slide assembly (see Figure C-6 and Table C-1).
3
2
1
Figure C-6. Rackmount slide parts