Installing The Rackmount Top Cover; Figure C-5. Installing The Rackmount Top Cover - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

C-6 Compaq StorageWorks SSL2000 Series Library Maintenance and Service Guide

Installing the Rackmount Top Cover

Install the rackmount top cover to protect the internal components of the Library prior to
mounting it into a storage cabinet (see Figure C-5). To install the rackmount top cover:
1. Place the top cover over the Library with each side flange facing to the outside of the unit.
2. Slide the top cover forward until it is flush with the front panel.
3. Secure the top cover to the Library using two screws (see Figure C-5).
4. Remove the rubber feet.

Figure C-5. Installing the rackmount top cover

cc0019