Using The Escape Button To Access Status Mode; Front Panel And Media Locks; Table 2-1 Control Panel Button Functions - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

Library
Table of Contents

Advertisement

Using the Escape Button to Access Status Mode

To enter the Status Mode, which displays all aspects of the Library's operating and
configuration status, press the Escape
Display/Mode
At POST Screen
At Default Screen
In Status Mode
(while online)
In Menu Mode
At Fault Screen
NOTE: There is an auto-repeat feature for the
more than one-half second, the control panel behaves as if you were pressing and releasing the button
about four times per second. This effect stops when you release the button.

Front Panel and Media Locks

A security feature is available to avoid accidental interruption of Library operation by entering
the Menu mode or removing cartridges while the host is accessing the Library. The front panel
and the media can be electronically locked. When the front panel is locked, you can only enter
the Menu mode after entering a 4-digit code. That is, when the Default screen appears, pressing
the Enter
Enter button does not invoke the Menu mode until you enter the code. The front panel
Enter
Enter
cannot be unlocked without using the Security submenu to unlock it.
The media can also be locked by software running on the host, using the SCSI
ALLOW/PREVENT MEDIUM REMOVAL command. The Library provides no control panel
override for this command. Usually, exiting the host software restores media access. In the event
of host failure, you can restore media access by cycling the Library power.
Procedures for locking and unlocking front panels and media are described later in this chapter.
Escape button at the Default screen. The Library remains online.
Escape
Escape
Table 2-1
Control Panel Button Functions
Escape
Enter
N/A
N/A
Enters Status
Enters Menu
Mode
Mode
Returns to
Same as in Menu
Default Screen
Mode
Rejects Currently
Accepts Currently
Displayed Choice,
Displayed Choice
or
Aborts Control
Panel Operation
In Progress, or
Exits to Next
Higher Menu
Level, or
Exits Menu Mode
to Default Screen
N/A
Clears Soft Errors
p
p
Toggles between Page 1
Same as in Menu Mode
Moves u 1 Line
Upward Through
List of Options, or
Scrolls Part of
Display 1 Line
Toward Top of
List of Options
N/A
q
and
buttons. When you press either button for
Operation 2-5
q
N/A
and Page 2
Moves u 1 Line
Downward
Through List of
Options, or
Scrolls Part of
Display 1 Line
Toward Bottom of
List of Options
N/A

Advertisement

Table of Contents
loading

Table of Contents