Set Element Base; Set Serial Number; Set Default - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

C-44 Compaq StorageWorks SSL2000 Series Library Maintenance and Service Guide

Set Element Base

Transport: Lets you set the base address of the robotics mechanism. The default is 0000. Transport: Transport: Transport:
Storage: Lets you set the base address of the 19 magazine slots. The default is 0001. Storage:
Storage: Storage:
Transfer: Lets you set the base address of the drive. The default is 00E0 for Drive 0. Transfer:
Transfer: Transfer:
Import/Export: Lets you set the base address of the mail slot. The default is 00D0. Import/Export
Import/Export Import/Export

Set Serial Number

Serial Number: Lets you alter the unit's serial number as stored in the unit. The Library's Serial Number:
Serial Number: Serial Number:
robotics reports these settings in response to the SCSI INQUIRY command in the Unit Serial
Number Page.

Set Default

Compaq Defaults: Resets all configuration options to Compaq defaults. Compaq Defaults:
Compaq Defaults: Compaq Defaults: