Startup Display Messages; Power-On Self Test Screen; Initialization Screens - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

2-6 Compaq StorageWorks SSL2000 Series Library Maintenance and Service Guide

Startup Display Messages

The display on the control panel is capable of displaying four lines of 20 characters each, to
allow the use of easy-to-understand messages. Many of these messages and their functions are
described in this chapter. Those displays that are described in other chapters are cross-
referenced here as well.

Power-On Self Test Screen

When power is first applied to the module, a series of Power-On Self Test (POST) diagnostics
are performed. During POST execution, the model number of the module, the firmware
revision, and the status or result of the test in progress are displayed on the control panel as
shown:
Compaq SSL2020TL
Firmware Level 0X.XX
Checking Hardware

Initialization Screens

After the POST completes, the library robotics are initialized. A series of screens similar to the
one shown is displayed during this process.
Compaq SSL2020TL
Firmware Level 0X.XX
Initializing Loader