Table of Contents
Advertisement
To Reserve Slots
1. From the Default screen, press the Enter
2. From the Main menu, scroll down to the Configure menu and press the Enter
display the following Configure submenu:
u SCSI Options:
Library Options
Date and Time
Set Element Base
3. Scroll down to Library Options and press the Enter
4. Scroll down to Reserved Slots and press the Enter
Configuration:
*Standalone
.
.
.
.
Baud Rate:
*38,400
u Reserved Slots:
*0
5. Scroll down to the last line and specify the number of slots you are reserving. Press the
Enter
Enter button to save.
Enter
Enter
NOTE: If your software license limits the number of usable slots in the magazine, you must reserve the
remaining slots. You can use any of the reserved slots to store a cleaning cartridge (see Chapter 3,
" Maintenance" ).
6. Press the Escape
the next time the Library is rebooted.
Configuration Options
The following options are available in the Configuration menu.
SCSI Options
Library Parity: Lets you enable or disable the library robotics SCSI bus parity checking. The
Library Parity:
Library Parity:
Library Parity:
default is Library Parity Enabled.
Library Bus ID:
Library Bus ID: Lets you set the SCSI addresses of the library robotics. The default is 0.
Library Bus ID:
Library Bus ID:
Drive 0 Bus ID: Lets you set the SCSI addresses of the drives. The designators Drive 0 through
Drive 0 Bus ID:
Drive 0 Bus ID:
Drive 0 Bus ID:
Drive n refer to the first through n th drives, counting from the top unit in the Library system.
¤
£
Escape button repeatedly to return to the Default screen. Your choice takes effect
Escape
Escape
Enter button to display the Main menu.
Enter
Enter
Enter button.
Enter
Enter
Enter button. The following screen appears:
Enter
Enter
Installation C-41
Enter button to
Enter
Enter
Advertisement
Table of Contents
Troubleshooting
