Removing And Replacing A Tape Drive; Figure 5-10. Removing The Brace Plate; Figure 5-11. Removing The Upper Drive Mounting Plate - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

Removing and Replacing a Tape Drive

To remove a tape drive:
1. Turn off the power to the Library.
2. Unplug the Library from the power source.
3. Unplug the robotics ribbon cable from the controller board (see Figure 5-10).
4. Remove the brace plate (see Figure 5-10).

Figure 5-10. Removing the brace plate

5. Remove the two upper drive mounting plate screws (see Figure 5-11).

Figure 5-11. Removing the upper drive mounting plate

6. Lift out the upper drive mounting plate (see Figure 5-11).
Brace Plate
Screws
Robotics
Ribbon
Cable
cc0081
cc0021
Parts Removal and Replacement 5-11