Figure C-23. Ptm Layout; Figure C-24. Releasing The Elevator Car - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

Removing the Elevator Car
1. Lay the PTM on a flat surface with the elevator car facing you (see Figure C-23).
Upper Pulley
Elevator Car
Tensioner Ramp

Figure C-23. PTM layout

2. Remove the two screws that secure the elevator car to the belt clamp bracket (
C-24).

Figure C-24. Releasing the elevator car

cc0067
1
cc0043
Installation C-23
Motor Housing
Captive Screws
(attach elevator
car to Belt Clamp)
Drive Belt
Lower Pulley
Figure