Removing The Desktop Outside Cover; Figure C-4. Removing The Desktop Outside Cover - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

Removing the Desktop Outside Cover

Before installing the Library into a storage cabinet, you first remove the desktop outside cover
(see Figure C-4). To remove the outside cover:
1. Turn off power to the Library and then unplug it from the AC power source.
2. Remove the four screws that secure the outside cover to the unit.
3. Slide the outside cover toward the rear of the unit until it clears the lip behind the front
panel.
4. Lift the outside cover up and away from the unit.
5. Save the hardware.

Figure C-4. Removing the desktop outside cover

cc00018
Installation C-5