Figure C-2. Releasing The Lockdown Mechanism - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

1

Figure C-2. Releasing the lockdown mechanism

To lock the lockdown mechanism:
1. Park the shuttle assembly by selecting the Maintenance menu and then Park from the
Main menu.
NOTE: The shuttle assembly moves to its home position, bringing the threaded hole into alignment with
the lockdown screw.
2. Turn off the unit.
3. Disconnect the power cord from the AC power source.
4. If necessary, reposition the unit for easier access to the back panel.
5. Push in on the spring-loaded lockdown screw at the back of the unit and turn it clockwise
(Figure C-3). This secures the shuttle to a bracket and locks it in place.
cc0062
Installation C-3