Displaying Firmware Revisions; Loading And Unloading - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

2-14 Compaq StorageWorks SSL2000 Series Library Maintenance and Service Guide
Press the Enter Enter Enter button to accept the displayed unlock code or Escape Enter
menu.
The next time you try to enter the Menu Mode, the following screen appears. You can still
display the Status menu without using the security code by pressing the Escape
Default screen.
Front Panel Locked
ENTER to Unlock
ESCAPE to Exit
When you press the Enter
Unlock Code
"
Using the p and q buttons, set the first digit of the unlock code. Press the Enter
move the cursor to the second digit and repeat the process. When you have finished, press the
Escape button. The following screen appears: Escape
Escape Escape
Unlock Code
*"XXXX"
ENTER to Validate
ESCAPE to Exit
Press the Enter Enter button to validate your choice. If the code is correct, the Main menu appears. If
Enter Enter
the code is incorrect, an error screen appears. If you forgot your unlock code, contact your
Technical Support representative for assistance.

Displaying Firmware Revisions

You can display the library robotics firmware revision at any time by pressing the Escape
at the Default screen to enter the Status Mode. It displays as one of the options on the Library
Status submenu of the Status menu. It is also displayed on line 2 of the POST Screen and the
Initialization Screens.

Loading and Unloading

The Load/Unload menus let you specify a source and a destination for a cartridge movement, so
you use exactly the same procedure to load and unload. To load or unload a tape from the front
panel, use the Load/Unload menus as follows:
Ready
0
10
Enter button, the following screen appears:
Enter Enter
£
"
¤
_ _ _ _ _ _ _ 9
_ _ _ _ _ _ _ 18
Escape to return to the Main Escape Escape
Escape button at the Escape Escape
Enter button to
Enter Enter
Escape button Escape Escape