5. Attach the tie bars with the screws to the PTM extrusion, making sure that the beveled
edges of the tie bars are oriented as shown in (
the sides and pan-head screws at the rear.
1
Figure C-15. Attaching tie bars
6. Insert the tie bars (now mounted on the main PTM extrusion
aligning the two PTM extrusions so that the channel patterns match (see Figure C-16).
1
Figure C-16. Attaching PTM extrusions
Figure C-15). Use flat-head screws on
cc0034
) into the extension
2
Installation C-17
,
cc0035