Setting Up The Desktop Model; Setting Up The Rackmount Model; Precaution; Figure C-3. Locking The Lockdown Mechanism - HPE Compaq StorageWorks SSL2000 Series Maintenance And Service Manual

C-4 Compaq StorageWorks SSL2000 Series Library Maintenance and Service Guide

Figure C-3. Locking the lockdown mechanism

Setting up the Desktop Model

The Library tabletop model requires no mechanical assembly for mounting. Place the unit on a
desk, table, server top, or other stable, horizontal surface. Make sure the cooling grilles at the
rear of the unit are not obstructed. Allow 2 in (5 cm) of clearance behind the rear panel.

Setting up the Rackmount Model

To convert a tabletop Library to a rackmount model, order the Compaq Conversion Kit, part
number 175199-B21.

Precaution

If you do mount the Library in a storage cabinet, be sure to take the following precautions:
CAUTION: Before moving and installing a Library into a storage cabinet, make
sure that the robot is parked (using the control panel) and the lockdown
mechanism is locked.
CAUTION: To prevent tipping, never slide units out of the storage cabinet so
that more than 57 lb (226 kg) or 20% of the total storage cabinet weight is
extended at any time.
cc0063